LSF Version 7.3 - Administering Platform LSF

Viewing cluster information
44 Administering Platform LSF
Viewing daemon parameter configuration
1 Display all configuration settings for running LSF daemons.
❖ Use lsadmin showconf to display all configured parameters and their
values in
lsf.conf or ego.conf for LIM.
❖ Use badmin showconf to display all configured parameters and their
values in
lsf.conf or ego.conf for mbatchd and sbatchd.
In a MultiCluster environment,
lsadmin showconf and badmin showconf
only display the parameters of daemons on the local cluster.
Running
lsadmin showconf and badmin showconf from a master candidate
host will reach all server hosts in the cluster. Running
lsadmin showconf and
badmin showconf from a slave-only host may not be able to reach other
slave-only hosts.
You cannot r u n
lsadmin showconf and badmin showconf from client hosts.
lsadmin shows only server host configuration, not client host configuration.
lsadmin showconf and badmin showconf only displays the values used by
LSF.
lsadmin showconf and badmin showconf display EGO_MASTER_LIST
from wherever it is defined. You can define either LSF_MASTER_LIST in
lsf.conf or or EGO_MASTER_LIST in ego.conf. LIM reads lsf.conf first,
and
ego.conf if EGO is enabled in the LSF cluster. LIM only takes the value of
LSF_MASTER_LIST if EGO_MASTER_LIST is not defined at all in
lsf.conf.
For example, if EGO is enabled in the LSF cluster, and you define
LSF_MASTER_LIST in
lsf.conf, and EGO_MASTER_LIST in ego.conf,
lsadmin showconf and badmin showconf display the value of
EGO_MASTER_LIST in
ego.conf.
If EGO is disabled,
ego.conf not loaded, so whatever is defined in lsf.conf is
displayed.
2 Display
mbatchd and root sbatchd configuration.
❖ Use badmin showconf mbd to display the parameters configured in
lsf.conf or ego.conf that apply to mbatchd.
❖ Use badmin showconf sbd to display the parameters configured in
lsf.conf or ego.conf that apply to root sbatchd.
3 Display LIM configuration.
Use
lsadmin showconf lim to display the parameters configured in lsf.conf
or
ego.conf that apply to root LIM.
By default,
lsadmin displays the local LIM parameters. You can specify the host
to display the LIM parameters.
Examples ◆ Show mbatchd configuration:
badmin showconf mbd
MBD configuration at Fri Jun 8 10:27:52 CST 2007
LSB_SHAREDIR=/scratch/dev/lsf/user1/0604/work