LSF Version 7.3 - Administering Platform LSF

Configuring LSF and EGO
194 Administering Platform LSF
LSF and EGO
corresponding
parameters
The following table summarizes existing LSF parameters that have corresponding
EGO parameter names. You must continue to set other LSF parameters in
lsf.conf.
Parameters that have changed in LSF 7
The default for LSF_LIM_PORT has changed to accommodate EGO default port
configura6tion. On EGO, default ports start with lim at 7869, and are numbered
consecutively for
pem, vemkd, and egosc.
This is different from previous LSF releases where the default LSF_LIM_PORT was
6879.
res, sbatchd, and mbatchd continue to use the default pre-version 7 ports
6878, 6881, and 6882.
Upgrade installation preserves any existing port settings for
lim, res, sbatchd, and
mbatchd. EGO pem, vemkd, and egosc use default EGO ports starting at 7870, if
they do not conflict with existing
lim, res, sbatchd, and mbatchd ports.
EGO connection
ports and base port
On every host, a set of connection ports must be free for use by LSF and EGO
components.
lsf.conf parameter ego.conf parameter
LSF_API_CONNTIMEOUT EGO_LIM_CONNTIMEOUT
LSF_API_RECVTIMEOUT EGO_LIM_RECVTIMEOUT
LSF_CLUSTER_ID (Windows) EGO_CLUSTER_ID (Windows)
LSF_CONF_RETRY_INT EGO_CONF_RETRY_INT
LSF_CONF_RETRY_MAX EGO_CONF_RETRY_MAX
LSF_DEBUG_LIM EGO_DEBUG_LIM
LSF_DHPC_ENV EGO_DHPC_ENV
LSF_DYNAMIC_HOST_TIMEOUT EGO_DYNAMIC_HOST_TIMEOUT
LSF_DYNAMIC_HOST_WAIT_TIME EGO_DYNAMIC_HOST_WAIT_TIME
LSF_ENABLE_DUALCORE EGO_ENABLE_DUALCORE
LSF_GET_CONF EGO_GET_CONF
LSF_GETCONF_MAX EGO_GETCONF_MAX
LSF_LIM_DEBUG EGO_LIM_DEBUG
LSF_LIM_PORT EGO_LIM_PORT
LSF_LOCAL_RESOURCES EGO_LOCAL_RESOURCES
LSF_LOG_MASK EGO_LOG_MASK
LSF_MASTER_LIST EGO_MASTER_LIST
LSF_PIM_INFODIR EGO_PIM_INFODIR
LSF_PIM_SLEEPTIME EGO_PIM_SLEEPTIME
LSF_PIM_SLEEPTIME_UPDATE EGO_PIM_SLEEPTIME_UPDATE
LSF_RSH EGO_RSH
LSF_STRIP_DOMAIN EGO_STRIP_DOMAIN
LSF_TIME_LIM EGO_TIME_LIM