Platform LSF Reference Version 6.2

Parameters
Platform LSF Reference
548
% bjobs -l
Job <109>, User <user3>, Project <default>, Status <RUN>, Queue <normal>, Inte
ractive mode, Command <./myjob.sh>
Mon Jul 21 20:54:44: Submitted from host <hostA>, CWD <$HOME/LSF/jobs;
RUNLIMIT
10.0 min of hostA
STACKLIMIT CORELIMIT MEMLIMIT
5256 K 10000 K 5000 K
Mon Jul 21 20:54:51: Started on <hostA>;
Mon Jul 21 20:55:03: Resource usage collected.
MEM: 2 Mbytes; SWAP: 15 Mbytes
PGID(s): 256871:1 PID, 257325:7 PIDs
SCHEDULING PARAMETERS:
r15s r1m r15m ut pg io ls it tmp swp mem
loadSched - - - - - - - - - - -
loadStop - - - - - - - - - - -
Default
Undefined
LSF_HPC_NCPU_COND
Syntax
LSF_HPC_NCPU_COND=and
| or
Description
Defines how any two LSF_HPC_NCPU_* thresholds are combined.
Default or
LSF_HPC_NCPU_INCREMENT
Syntax
LSF_HPC_NCPU_INCREMENT=
increment
Description
Defines the upper limit for the number of CPUs that are changed since the last checking
cycle.
Default
0
LSF_HPC_NCPU_INCR_CYCLES
Syntax
LSF_HPC_NCPU_INCR_CYCLES=
incr_cyscles
Description
Minimum number of consecutive cycles where the number of CPUs changed does not
exceed LSF_HPC_NCPU_INCREMENT. LSF checks total usable CPUs every 2
minutes.
Default
1
LSF_HPC_NCPU_THRESHOLD
Syntax
LSF_HPC_NCPU_THRESHOLD=
threshold
Description
LSF_HPC_NCPU_THRESHOLD=threshold
The percentage of total usable CPUs in the LSF partition of an HP XC system.
Default
80