Platform LSF Reference Version 6.2

Parameters
Platform LSF Reference
538
Default
LSF_MACHDEP/bin
LSF_CMD_LOGDIR
Syntax
LSF_CMD_LOGDIR=
path
Description
The path to the log files used for debugging LSF commands.
This parameter can also be set from the command line.
Default /tmp
See also
LSB_CMD_LOG_MASK, LSB_CMD_LOGDIR, LSB_DEBUG,
LSB_DEBUG_CMD, LSB_TIME_CMD, LSF_CMD_LOG_MASK,
LSF_LOG_MASK, LSF_LOGDIR, LSF_TIME_CMD
LSF_CMD_LOG_MASK
Syntax
LSF_CMD_LOG_MASK=
log_level
Description
Specifies the logging level of error messages from LSF commands.
For example:
LSF_CMD_LOG_MASK=LOG_DEBUG
To specify the logging level of error messages, use LSB_CMD_LOG_MASK. To
specify the logging level of error messages for LSF daemons, use LSF_LOG_MASK.
LSF commands log error messages in different levels so that you can choose to log all
messages, or only log messages that are deemed critical. The level specified by
LSF_CMD_LOG_MASK determines which messages are recorded and which are
discarded. All messages logged at the specified level or higher are recorded, while lower
level messages are discarded.
For debugging purposes, the level LOG_DEBUG contains the fewest number of
debugging messages and is used for basic debugging. The level LOG_DEBUG3 records
all debugging messages, and can cause log files to grow very large; it is not often used.
Most debugging is done at the level LOG_DEBUG2.
The commands log to the
syslog facility unless LSF_CMD_LOGDIR is set.
Valid values
The log levels from highest to lowest are:
◆ LOG_EMERG
◆ LOG_ALERT
◆ LOG_CRIT
◆ LOG_ERR
◆ LOG_WARNING
◆ LOG_NOTICE
◆ LOG_INFO
◆ LOG_DEBUG
◆ LOG_DEBUG1
◆ LOG_DEBUG2
◆ LOG_DEBUG3
Default
LOG_WARNING