Platform LSF Reference Version 6.2

badmin
Platform LSF Reference
33
Default: local host (host from which command was submitted)
sbdtime [-l timing_level] [-f logfile_name] [-o] [host_name ...]
Sets the timing level for sbatchd to include additional timing information in log files.
You must be
root or the LSF administrator to use this command.
In MultiCluster, timing levels can only be set for hosts within the same cluster. For
example, you could not set debug or timing levels from a host in
clusterA for a host
in
clusterB. You need to be on a host in clusterB to set up debug or timing levels
for
clusterB hosts.
If the command is used without any options, the following default values are used:
timing_level=no timing information is recorded
logfile_name=current LSF system log file in the LSF system log file directory, in the
format daemon_name.
log.host_name
host_name=local host (host from which command was submitted)
-l timing_level
Specifies detail of timing information that is included in log files. Timing
messages indicate the execution time of functions in the software and are
logged in milliseconds.
Valid values: 1 | 2 | 3 | 4 | 5
The higher the number, the more functions in the software that are timed and
whose execution time is logged. The lower numbers include more common
software functions. Higher levels include all lower levels.
Default: undefined (no timing information is logged)
-f logfile_name
Specify the name of the file into which timing messages are to be logged. A file
name with or without a full path may be specified.
If a file name without a path is specified, the file will be saved in the LSF system
log file directory.
The name of the file created has the following format:
logfile_name.daemon_name.
log.host_name
On UNIX, if the specified path is not valid, the log file is created in the
/tmp
directory.
On Windows, if the specified path is not valid, no log file is created.
Note: Both timing and debug messages are logged in the same files.
Default: current LSF system log file in the LSF system log file directory, in the
format daemon_name.
log.host_name.
-o
Optional. Turn off temporary timing settings and reset them to the daemon
starting state. The timing level is reset back to the value of the parameter for the
corresponding daemon (LSB_TIME_MBD, LSB_TIME_SBD).
The log file is also reset back to the default log file.