Platform LSF Reference Version 6.2
Environment Variable Reference
Platform LSF Reference
286
LSF_DEBUG_CMD
This parameter can be set from the command line or from lsf.conf.
See “lsf.conf” under “LSB_DEBUG_MBD” on page 513.
LSF_DEBUG_LIM
This parameter can be set from the command line or from lsf.conf.
See “lsf.conf” under “LSF_DEBUG_LIM” on page 539.
LSF_DEBUG_RES
This parameter can be set from the command line or from lsf.conf.
See “lsf.conf” under “LSF_DEBUG_RES” on page 540.
LSF_EAUTH_AUX_DATA
Syntax
LSF_EAUTH_AUX_DATA=path/file_name
Description
The full path to the temporary file on the local file system that is used for storing
auxiliary authentication information.
Notes
Credentials are passed between invocations of eauth and the daemons through the file
defined by LSF_EAUTH_AUX_DATA.
To allow daemons to call
eauth to authenticate each other, you must define
LSF_AUTH_DAEMONS.
Where defined Set internally by eauth
See also
LSF_AUTH_DAEMONS, LSF_EAUTH_AUX_PASS
LSF_EAUTH_AUX_PASS
Syntax
LSF_EAUTH_AUX_PASS=yes
Description
Grants permission.
LSF_EAUTH_AUX_PASS is passed to
eauth -c when
LSF_EAUTH_CLIENT=user, and it tells
eauth that it has permission to forward
auxiliary authentication data.
To allow daemons to call
eauth to authenticate each other, you must define
LSF_AUTH_DAEMONS.
Where defined
Set internally
Product
SUN HPC
See also
LSF_EAUTH_AUX_DATA, LSF_EAUTH_CLIENT
LSF_EAUTH_CLIENT
Syntax
◆
SUN HPC
LSF_EAUTH_CLIENT=mbatchd | sbatchd | pam | res | user
◆
LSF3.2+
LSF_EAUTH_CLIENT=user