Platform LSF Administration Guide Version 6.2

Chapter 4
Working with Hosts
Administering Platform LSF
97
% lsinfo -m
MODEL_NAME CPU_FACTOR ARCHITECTURE
PC1133 23.10 x6_1189_PentiumIIICoppermine
HP9K735 4.50 HP9000735_125
HP9K778 5.50 HP9000778
Ultra5S 10.30 SUNWUltra510_270_sparcv9
Ultra2 20.20 SUNWUltra2_300_sparc
Enterprise3000 20.00 SUNWUltraEnterprise_167_sparc
Run lsinfo -M to display all host models defined in lsf.shared:
% lsinfo -M
MODEL_NAME CPU_FACTOR ARCHITECTURE
UNKNOWN_AUTO_DETECT 1.00 UNKNOWN_AUTO_DETECT
DEFAULT 1.00
LINUX133 2.50 x586_53_Pentium75
PC200 4.50 i86pc_200
Intel_IA64 12.00 ia64
Ultra5S 10.30 SUNWUltra5_270_sparcv9
PowerPC_G4 12.00 x7400G4
HP300 1.00
SunSparc 12.00
Run lim -t to display the model of the current host. You must be the LSF
administrator to use this command:
%
lim -t
Host Type : SOL732
Host Architecture : SUNWUltra2_200_sparcv9
Matched Type : SOL732
Matched Architecture : SUNWUltra2_300_sparc
Matched Model : Ultra2
CPU Factor : 20.2
Viewing job exit rate and load for hosts
Use bhosts to display the exception threshold for job exit rate and the current load
value for hosts. For example, EXIT_RATE for
hostA is configured as 4 jobs per
minute.
hostA does not currently exceed this rate:
% bhosts -l hostA
HOST hostA
STATUS CPUF JL/U MAX NJOBS RUN SSUSP USUSP RSV
DISPATCH_WINDOW
ok 18.60 - 1 0 0 0 0 0 -
CURRENT LOAD USED FOR SCHEDULING:
r15s r1m r15m ut pg io ls it tmp swp mem
Total 0.0 0.0 0.0 0% 0.0 0 1 2 646M 648M 115M
Reserved 0.0 0.0 0.0 0% 0.0 0 0 0 0M 0M 0M
share_rsrc host_rsrc
Total 3.0 2.0
Reserved 0.0 0.0