Platform LSF Administration Guide Version 6.2

Error Messages
Administering Platform LSF
614
authRequest: Submitter’s name <clname>@<clhost> is different from name <lname>
on this host
RES assumes that a user has the same userID and username on all the LSF hosts. These
messages occur if this assumption is violated. If the user is allowed to use LSF for
interactive remote execution, make sure the user’s account has the same userID and
username on all LSF hosts.
doacceptconn: root remote execution permission denied
authRequest: root job submission rejected
Root tried to execute or submit a job but LSF_ROOT_REX is not defined in the
lsf.conf file.
resControl: operation permission denied, uid = <uid>
The user with user ID uid is not allowed to make RES control requests. Only the LSF
manager, or root if LSF_ROOT_REX is defined in
lsf.conf, can make RES control
requests.
resControl: access(respath, X_OK): error
The RES received a reboot request, but failed to find the file respath to re-execute
itself. Make sure
respath contains the RES binary, and it has execution permission.
mbatchd and sbatchd messages
The following messages are logged by the mbatchd and sbatchd daemons:
renewJob: Job <jobId>: rename(<from>,<to>) failed: error
mbatchd failed in trying to re-submit a rerunnable job. Check that the file from exists
and that the LSF administrator can rename the file. If from is in an AFS directory, check
that the LSF administrator’s token processing is properly setup.
See the document “Installing LSF on AFS” on the Platform Web site for more
information about installing on AFS.
logJobInfo_: fopen(<logdir/info/jobfile>) failed: error
logJobInfo_: write <logdir/info/jobfile> <data> failed: error
logJobInfo_: seek <logdir/info/jobfile> failed: error
logJobInfo_: write <logdir/info/jobfile> xdrpos <pos> failed: error
logJobInfo_: write <logdir/info/jobfile> xdr buf len <len> failed: error
logJobInfo_: close(<logdir/info/jobfile>) failed: error
rmLogJobInfo: Job <jobId>: can’t unlink(<logdir/info/jobfile>): error
rmLogJobInfo_: Job <jobId>: can’t stat(<logdir/info/jobfile>): error
readLogJobInfo: Job <jobId> can’t open(<logdir/info/jobfile>): error
start_job: Job <jobId>: readLogJobInfo failed: error
readLogJobInfo: Job <jobId>: can’t read(<logdir/info/jobfile>) size size: error
initLog: mkdir(<logdir/info>) failed: error
<fname>: fopen(<logdir/file> failed: error
getElogLock: Can’t open existing lock file <logdir/file>: error
getElogLock: Error in opening lock file <logdir/file>: error
releaseElogLock: unlink(<logdir/lockfile>) failed: error