Master Firmware Tables for HP XC System Software Version 3.1

1.9 Interconnects
Table 1-7 Minimum Firmware Versions for Interconnects
Minimum Firmware VersionComponent
Switch Firmware Version 44–6051299Quadrics ELAN4 Qsnet
II
®
• Switch Firmware Version 1.0.14
• Switch Firmware Version 9.6.6 (for the 256 port switch)
Myricom Myrinet®
Switch Management Board (SMB) Software
• ISR 9024 switches:
Version: 3.4.5
CAUTION: If the switch is installed with firmware Version 3.2
or older, you must first install firmware Version 3.3.n before
upgrading to firmware Version 3.4.5.
Date: Aug 24 2006 02:37:44 PM
Build Id: 463
• ISR 9096 and 9288 switches
Version: 3.4.2
Date: Jan 03 2006 12:56:59 PM
Build Id: 375
• Host Channel Adapter Boards for PCI-X Firmware Version = 3.3.2
• Host Channel Adapter Boards for PCI-Express Firmware Version
= 4.6.2
• 9024 Chip Firmware Version = 0.8.4
• Line Board Firmware Version = 0.8.0
• Spine Board Firmware Version = 0.8.0
• DDR Line Board Firmware Version = 0.8.6
• DDR Spine Board Firmware Version = 0.8.6
• IB PCI-X Card Version = 3.3.2
• IB PCI Express Card Version = 4.7
• HP Server Blade Mezzanine and 25204 Mem Free HCA boards
Firmware Version = 1.0.8
InfiniBand®
1.10 MP, iLO, and LO100i Console Port Management Devices
Table 1-8 Minimum Firmware Versions for Console Port Management Devices
Minimum Firmware VersionComponent
3.15Management Processors (MP)
1.82Integrated Lights Out (iLO)
1.20iLO2 for HP ProLiant
• HP ProLiant DL140 G2: 1.25
• HP ProLiant DL140 G3: 2.11
• HP ProLiant DL145 G1: 2.01
• HP ProLiant DL145 G2: 1.25
Before you begin a software upgrade to HP XC Version 3.1, read the
HP XC System Software Release Notes for information about updating
BMC firmware on the HP ProLiant DL140 and DL145 G2 hardware
models.
LO100i (also known as Base Motherboard
Controller (BMC))
10 Master Firmware Versions