Incorporating External NICs HowTo

Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: umbg
Wake-on: g
Current message level: 0x00000007 (7)
Link detected: yes
For information on the ethtool command, see ethtool(8).
6 Troubleshooting
Use the standard Linux networking commands to troubleshoot your network connection.
7 On Successful Completion
After you have verified success, be sure to update the golden image to ensure that the changes
you made to the configuration files in this HowTo are propagated. See Chapter 10 of the HP XC
System Software Administration Guide for information on updating the golden image.
8 HP Encourages Your Comments
HP encourages you to provide comments about this document because HP is committed to
providing documentation that meets your needs. Send any errors found, suggestions for
improvement, or compliments to the following address:
[e-mail]
Include the document title, part number, and all other pertinent information in your email.
6 Troubleshooting 21