HP XC System Software Release Notes for Version 3.0

ManualsBrandsHP ManualsSoftwareHP XC System 3.x Software

Last Modified: 11-30-2005

License: GPL

Reading configuration data...

Warning: Duplicate definition found for service 'slurmstatus'

(config file '/opt/hpt c/nagios/etc/xc-monitor-n16.cfg',

starting on line 415)

Warning: Duplicate definition found for service

'resourcestatus' (config file '/opt/ hptc/nagios/etc/xc-monitor-xc6n16.cfg',

starting on line 445)

Warning: Duplicate definition found for service 'nrpe'

(config |file '/opt/hptc/nagio s/etc/xc-monitor-n16.cfg',

starting on line 488)

Warning: Duplicate definition found for service 'power'

(config file '/opt/hptc/nagi os/etc/xc-monitor-n16.cfg', starting on

line 498)

5.10 OVP qsnet_database Test May Fail Due to Benign Errors Returned

By The qsctrl Utility

The following release note is specific to systems using the QsNet

interconnect.

In this release, it is not possible for the qsnet2 utilities to detect that a node is missing. Therefore,

the /usr/bin/qsctrl utility reports a warning message for all links in reset. For example:

# qsctrl

qsctrl: QR0N00:00:0:0 <--> Elan:0:0 state 3 should be 4

qsctrl: QR0N00:00:0:1 <--> Elan:0:1 state 3 should be 4

qsctrl: QR0N00:00:0:2 <--> Elan:0:2 state 3 should be 4

qsctrl: QR0N00:00:0:3 <--> Elan:0:3 state 3 should be 4

qsctrl: QR0N00:00:1:0 <--> Elan:0:4 state 3 should be 4

qsctrl: QR0N00:00:1:1 <--> Elan:0:5 state 3 should be 4

qsctrl: QR0N00:00:1:2 <--> Elan:0:6 state 3 should be 4

qsctrl: QR0N00:00:1:3 <--> Elan:0:7 state 3 should be 4

qsctrl: QR0N00:00:2:0 <--> Elan:0:8 state 3 should be 4

qsctrl: QR0N00:00:2:1 <--> Elan:0:9 state 3 should be 4

qsctrl: QR0N00:00:2:2 <--> Elan:0:10 state 3 should be 4

qsctrl: QR0N00:00:2:3 <--> Elan:0:11 state 3 should be 4

qsctrl: QR0N00:00:3:0 <--> Elan:0:12 state 3 should be 4

qsctrl: QR0N00:00:3:1 <--> Elan:0:13 state 3 should be 4

qsctrl: QR0N00:00:3:2 <--> Elan:0:14 state 3 should be 4

qsctrl: QR0N00:00:3:3 <--> Elan:0:15 state 3 should be 4

qsctrl: QR0N00:01:0:0 <--> Elan:0:16 state 3 should be 4

qsctrl: QR0N00:01:0:1 <--> Elan:0:17 state 3 should be 4

qsctrl: QR0N00:01:0:2 <--> Elan:0:18 state 3 should be 4

qsctrl: QR0N00:01:0:3 <--> Elan:0:19 state 3 should be 4

qsctrl: Warning: failed link state check on 1 modules

To work around this issue, configure out the unconnected links using the qsctrl -o command.

For example,

# qsctrl -o QR0N00:00:0:0

# qsctrl -o QR0N00:00:0:1

# qsctrl -o QR0N00:00:0:2

36 Configuration Notes