HP XC System Software Installation Guide Version 3.2.1

Logging installation sequence in /opt/hptc/lsf/files/lsfslurm/
install-20060925114531/lsf6.2_lsfinstall/Install.log
1) linux2.6-glibc2.3-x86_64-slurm
Press 1 or Enter to install this host type: Enter
1
1
The sample command output was obtained from an HP ProLiant server. The tar
file name is linux2.6-glibc2.3-x86_64-slurm (the string x86_64 signifies
an Opteron or Xeon chip architecture). The string ia64 is included in the file name
for HP Integrity servers.
20. Follow along with the remainder of the system configuration process. This sample output
is provided for your information only; there is nothing else you have to do in this step.
Despite some of the messages shown in the command output, everything you need to install,
configure, and verify LSF and SLURM is described in this document.
Pre-installation check report saved as text file:
/opt/hptc/lsf/files/lsfslurm/install-20060925114531/
lsf6.2_lsfinstall/prechk.rpt
.
... Done LSF pre-installation check.
... Done installing lsf binary files "linux2.6-glibc2.3-x86_64-slurm".
... LSF configuration is done.
lsfinstall is done.
To complete your lsf installation and get your
cluster "hptclsf" up and running, follow the steps in
"/opt/hptc/lsf/files/lsfslurm/install-20060925114531/
lsf6.2_lsfinstall/lsf_getting_started.html".
After setting up your LSF server hosts and verifying
your cluster "hptclsf" is running correctly,
see "/opt/hptc/lsf/top/6.2/lsf_quick_admin.html"
to learn more about your new LSF cluster.
***Begin LSF-HPC Post-Processing***
Created '/hptc_cluster/lsf/tmp'...
Editing /opt/hptc/lsf/top/conf/lsf.cluster.hptclsf...
Moving /opt/hptc/lsf/top/conf/lsf.cluster.hptclsf
to /opt/hptc/lsf/top/conf/lsf.cluster.hptclsf.old.7858...
Editing /opt/hptc/lsf/top/conf/lsf.conf...
Moving /opt/hptc/lsf/top/conf/lsf.conf
to /opt/hptc/lsf/top/conf/lsf.conf.old.7858...
Editing /opt/hptc/lsf/top/conf/lsbatch/hptclsf/configdir/lsb.params...
Moving /opt/hptc/lsf/top/conf/lsbatch/hptclsf/configdir/lsb.params
to /opt/hptc/lsf/top/conf/lsbatch/hptclsf/configdir/lsb.params.old.7858...
Replaced default lsb.queues with a preconfigured lsb.queues.
C95lsf finished
Executing C99translate gconfigure
All user specified configuration is complete.
The Golden Image will be created next.
[P]roceed, [Q]uit:
3.11 Task 10: Respond to Configuration Questions 99