HP XC System Software Installation Guide Version 3.2.1

# script your_filename
4. Change to the following directory:
# cd /opt/hptc/config/sbin
5. Start the discovery process:
# ./discover --enclosurebased --verbose --single
Command output is similar to the following:
Discovery - XC Cluster version HP XC V3.2.1 20071016
Enter the MAC address of the OA for the enclosure
in the format xx:xx:xx:xx:xx:xx : OA_MAC_address
Enter the common user name for all console port management devices: your_user_name
Please enter the password for your_user_name :
Please re-enter password:
Restarting dhcpd
waiting for OA to obtain IP address.
......................................
Enclosure blc4n-enc092UX740006L found
Restarting dhcpd
Opening /etc/hosts
Opening /etc/hosts.new.XC
uploading database
waiting for network component at 172.31.32.1 to become available.
...................
Discovering Blades ...
Blade found in enclosure blc4n-enc092UX740006L bay 1, name is blc4n1
Blade found in enclosure blc4n-enc092UX740006L bay 2, name is blc4n2
Blade found in enclosure blc4n-enc092UX740006L bay 3, name is blc4n3
Blade found in enclosure blc4n-enc092UX740006L bay 4, name is blc4n4
Blade found in enclosure blc4n-enc092UX740006L bay 5, name is blc4n5
Blade found in enclosure blc4n-enc092UX740006L bay 6, name is blc4n6
Headnode is blc4n1
Setting system name to blc4n1 ...
Discovering Non-Blade systems ...
No Virtual Enclosures found ... bypassing non-blade discovery
uploading database
Restarting dhcpd
Opening /etc/hosts
Opening /etc/hosts.new.XC
Opening /etc/powerd.conf
Building /etc/powerd.conf ... done
Attempting to start hpls power daemon ... done
Waiting for power daemon ... done
Discovery has found the following components:
0 Switches
0 Virtual Enclosures
1 Real Enclosures with 1 OnBoard Administrators
6 Nodes
6. If you captured the output of the discover command in a file (described in step 3), press
Ctrl-d to end the script session now.
This file is for your information only. Store this file in a directory where you keep
administrative data.
3.6 Task 5: Run the discover Command to Discover Hardware Components 73