HP XC System Software Installation Guide Version 3.2

Table A-1 Installation and Configuration Checklist (continued)
ReferenceTask and Description
Verifying the System
“Task 1: Verify the LSF Configuration”
(page 111)
32. Verify proper operation of LSF if you installed LSF.
“Task 2: Verify Availability Tools”
(page 112)
33. Verify proper operation of availability tools if you installed and
configured an availability tool.
“Task 3: Run the OVP to Verify
Software and Hardware Components”
(page 113)
34. Run the operation verification program (OVP).
“Task 4: Run the SVA OVP Utility”
(page 115)
35. Run the SVA OVP if you installed SVA.
“Task 5: View System Health” (page 115)
36. Verify system health with the Nagios web interface and the nrg
command.
“Task 6: Create a Baseline Copy of the
Database” (page 116)
37. Create a snapshot of the configuration and management database for
future use.
“Task 7: Create a Baseline Report of the
System Configuration” (page 117)
38. Run the sys_check utility to create a baseline report of the system
configuration.
184 Installation and Configuration Checklist