HP XC System Software Installation Guide Version 3.2

# stopsys n[1-5]
# startsys --image_and_boot n[1-5]
All nodes reboot automatically when the installation is finished.
5. Run the transfer_to_avail command to shut down all HP XC services and IP aliases
that will be managed by an availability tool. After shutting down these services and IP
aliases, the transfer_to_avail command starts each availability tool. Then, the availability
tool starts up the services and IP aliases it is managing.
6. Reset the job state on nodes n1 through n5:
# scontrol update NodeName=n[1-5] State=IDLE
6.2 Reinstalling Systems with HP Integrity Hardware Models 135