HP XC System Software Installation Guide Version 3.0

32768 blocks per group, 32768 fragments per group

16384 inodes per group

Superblock backups stored on blocks:

32768, 98304, 163840, 229376, 294912, 819200, 884736,

1605632, 2654208, 4096000, 7962624

Writing inode tables: done

Creating journal (8192 blocks): done

Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 20 mounts or

180 days, whichever comes first. Use tune2fs -c or -i to override.

6. Create an empty directory to serve as the mount point for the SAN volume. In this example, /san is

the directory name.

# mkdir /san

7. Mount the storage devices that contain valid file systems. In this example, /dev/sdb is the device

name and /san is the mount point on the host:

# mount /dev/sdb /san

For information about exporting SAN storage to all nodes, see the

HP XC System Software Administration

Guide

76 Configuring SAN Storage Devices