HP XC System Software Installation Guide Version 3.0

Running 'lshosts -w'.

Checking output from lshosts.

Running 'controllsf show' to determine virtual hostname.

Checking output from controllsf.

Virtual hostname is lsfhost.localdomain

Comparing ncpus from Lsf lshosts to Slurm cpu count.

+++ PASSED +++

Testing hosts_status ...

Running 'bhosts -w'.

Checking output from bhosts.

Running 'controllsf show' to determine virtual hostname.

Checking output from controllsf.

Virtual hostname is lsfhost.localdomain

Comparing MAX job slots from Lsf bhosts to Slurm cpu count.

+++ PASSED +++

Verify interconnect:

Testing infiniband/port_state ...

Collecting vstat data from all nodes...

+++ PASSED +++

Verify nagios:

Testing configuration ...

Running basic sanity check on the Nagios configuration file.

Starting the command:

/opt/hptc/bin/nagios -v /opt/hptc/nagios/etc/nagios_local.cfg

Here is the output from the command:

Nagios 2.0b6

Last Modified: 11-30-2005

License: GPL

Reading configuration data...

Running pre-flight check on configuration data...

Checking services...

Checked 71 services.

Checking hosts...

Warning: Host 'necs1-1' has no services associated with it!

Checked 8 hosts.

Checking host groups...

Checked 10 host groups.

Checking service groups...

Checked 6 service groups.

Checking contacts...

Checked 1 contacts.

Checking contact groups...

70 Verifying the System