HP XC System Software Installation Guide Version 3.0
Discovering 172.20.65.2 port 20 ... Console Port OK
Discovering 172.20.65.2 port 19 ... Console Port OK
Discovering 172.20.65.2 port 18 ... Console Port OK
Discovering 172.20.65.2 port 17 ... Console Port OK
Restarting dhcpd
discovered_cps is 6
Checking if all console ports are reachable ...
number of cps to check, 5
pinging 172.21.0.13 no response from 172.21.0.13
pinging 172.21.0.15 no response from 172.21.0.15
pinging 172.21.0.12
pinging 172.21.0.14
pinging 172.21.0.11
Following console ports did not respond:
172.21.0.13 172.21.0.15
number of cps to check, 2
pinging 172.21.0.13 no response from 172.21.0.13
pinging 172.21.0.15
Following console ports did not respond:
172.21.0.13
number of cps to check, 1
pinging 172.21.0.13 .done
Opening /etc/hosts
Opening /etc/hosts.new.XC
Opening /etc/powerd.conf
Building /etc/powerd.conf ... Querying cp-n11
Querying cp-n12
Querying cp-n13
Querying cp-n14
Querying cp-n15
1
done
Attempting to power on nodes with nodestring n[11-15]
Powering on all known nodes ... done
Discovering Nodes...
running port_discover on 172.20.65.1
nodes Found = 1 nodes Expected = 6
running port_discover on 172.20.65.1
nodes Found = 1 nodes Expected = 6
running port_discover on 172.20.65.1
nodes Found = 1 nodes Expected = 6
running port_discover on 172.20.65.1
nodes Found = 1 nodes Expected = 6
running port_discover on 172.20.65.1
nodes Found = 1 nodes Expected = 6
running port_discover on 172.20.65.1
nodes Found = 2 nodes Expected = 6
1. See Appendix K (page 141) if the discover process hangs while trying to discover console ports.
Task 4: Run the discover Command to Discover System Components 43