HP XC System Software Hardware Preparation Guide Version 3.2

Table 4-1 Firmware Dependencies (continued)
Firmware DependencyHardware Component
iLO, system BIOSHP ProLiant DL385 G1
iLO, system BIOSHP ProLiant DL385 G2
iLO, system BIOSHP ProLiant DL585 G1
iLO, system BIOSHP ProLiant DL585 G2
CP4000BL
iLO2, system BIOS, OAHP ProLiant BL465c G1 Server Blade
(Half-height)
iLO2, system BIOS, OAHP ProLiant BL685c G1 Server Blade
(Full-height)
CP6000
Management Processor (MP), BMC, Extensible Firmware Interface
(EFI)
HP Integrity rx1620
MP, BMC, EFI, systemHP Integrity rx2600
MP, BMC, EFI, systemHP Integrity rx2620
MP, BMC, EFI, systemHP Integrity rx2660
MP, BMC, EFI, systemHP Integrity rx4640
MP, BMC, EFI, systemHP Integrity rx8620
CP6000BL
MP, OAHP Integrity BL860c Server Blade (Full-height)
Switches
Firmware versionProCurve 2824 switch
Firmware versionProCurve 2848 switch
Firmware versionProCurve 2650 switch
Firmware versionProCurve 2626 switch
Interconnect
Firmware versionMyrinet
Interface card versionMyrinet interface card
Firmware versionQsNet
II
Firmware versionInfiniBand
4.2 Ethernet Port Connections on the Head Node
Table 4-2 lists the Ethernet port connections on the head node based on the type of interconnect
in use. Use this information to determine the appropriate connections for the external network
connection on the head node.
48 Preparing Individual Nodes