HP XC System Software Administration Guide Version 3.1

• Examine the output of the ifconfig command on the HP XC LSF node to ensure that the LSF alias
was properly established.
If eth0 is the external network device, the LSF alias entry is eth0:lsf.
• Use the appropriate LSF commands to restart daemons when network communications have been
adjusted:
— lsadmin reconfig to restart the Load Information manager (LIM)
— badmin mbdrestart to restart the Master Batch Daemon (mbatchd)
— badmin reconfig to reset the batch settings for the Slave Batch Daemon (sbatchd).
See the Platform LSF documentation for more information on these commands and Standard LSF.
A.10 Troubleshooting 263