HP XC System Software Release Notes for Version 2.1

14. Perform this step on all nodes, including the head node:
a. Choose the Select Input Console option to enable console messages
to be displayed on the screen when you turn on the system:
i. Enable the Acpi(HWP0002,0)/Pci(1|1)/Uart(9600
N81)/VenMsg(Vt100+) option.
ii. Enter Y to save the entry to NVRAM.
iii. Choose Exit to return to the menu.
b. Choose the Select Output Console option to enable console messages
to be displayed on the screen when you turn on the system:
i. Enable the Acpi(HWP0002,0)/Pci(1|1)/Uart(9600
N81)/VenMsg(Vt100+) option.
ii. Enable the Acpi(HWP0002,0)/Pci(4|0) option.
iii. Enter Y to save the entry to NVRAM.
iv. Choose Exit to return to the menu.
c. Choose the Select Active Standard Error Devices option from
the Boot Option Maintenance Menu to enable console messages to be
displayed on the screen when you turn on the system.
i. Enable the Acpi(HWP0002,0)/Pci(1|1)/Uart(9600
N81)/VenMsg(Vt100+) option.
ii. Enable the Acpi(HWP0002,0)/Pci(4|0) option.
iii. Enter Y to save the entry to NVRAM.
iv. Choose Exit to return to the menu.
d. Press the Esc key to return to the Boot Menu.
15. Turn off power to the node:
a. Press Ctrl/b to exit console mode.
b. Enter CM to display the Command Menu.
c. Enter PC to turn off power to the node.
3.4 Preparing HP Integrity rx2620 Servers
To prepare HP Integrity rx2620 servers, do not use the instructions in the HP XC
Hardware Preparation Guide, follow the hardware preparation tasks provided for
the HP Integrity rx4640 shown in Section 3.3 in this document.
3-4 Hardware Preparation Notes