HP XC System Software Release Notes for Version 2.1

- qsnet2diagscommon-1.0.12-2.1hptc
- qsnet2diags-1.0.12-3.1hptc
- qsnetdiags-1.0.2-14.1hptc
1.9 Serviceability
New versions of the following utilities were added:
• hpasm Version hpasm-7.1.1b-95
• collectl Version hp-collectl-1.3.1-1
1.10 Documentation Changes
All manuals in the HP XC System Software Documentation Set were revised to
incorporate the new functionality delivered in this release.
As a convenience for users who are familiar with previous versions of the XC
software manuals, the following sections describe information in the HP XC
System Software Documentation Set that was enhanced, added, condensed, moved,
or removed for this release.
1.10.1 HP XC Hardware Preparation Guide
Hardware preparation tasks were added for the following new supported hardware
models:
• HP ProLiant DL140 G2
• HP ProLiant DL145 G2
• HP ProLiant DL385
• HP Integrity rx1620
• HP Integrity rx2620
• HP Integrity rx4640
1.10.2 HP XC System Software Installation Guide
The following changes were made in this manual:
• The appendix containing the sample Kickstart configuration files was removed.
If you want to view the Kickstart configuration file ks.cfg, mount the HP
XC System Software DVD.
• A new appendix provides a list of appropriate Ethernet interfaces to use as the
external network connection of the head node.
• A new appendix describes how to customize client node disk partitions.
• A new appendix describes how to enable telnet on Integrated Lights Out
(iLO) devices.
• Appendix I was enhanced to provide detailed descriptions of node roles.
• A new appendix describes how to determine the network type on systems using
a QsNet
II
interconnect.
• A new appendix describes how to install and configure the Maui Scheduler.
1.10.3 HP XC System Software Administration Guide
The following changes were made in this manual:
New Features 1-3