HP XC System Software Installation Guide Version 2.1

partition. If other partitions are desired they must be
configured manually in /hptc_cluster/slurm/etc/slurm.conf
Here is the current Node Partition configuration:
PartitionName=lsf RootOnly=YES Shared=FORCE Nodes=n[14-16]
The SLURM configuration is finished. Press ’Enter’ to continue:
Enter
Running C50supermond
Running C55lsf
_______________________ Note _______________________
After cluster_config processing is complete, you ha ve the optio n to
modify default SLURM compute n ode and partition information. This
information is described in Section 4.9.
11. When prompted, decide whether or n ot you want to install LSF HPC as your job
management system:
Do you wish to install LSF locally now? (y|n) [y]:
• If you want to install LSF HPC, enter y or press the Enter key to accept the default
response. P roceed to step 12.
• If y ou in tend to install another job management system, such as the Maui Scheduler
(which is documented in Appendix L), enter n. Proceed to step 14.
If at a future time you want to inst
all LSF HPC, rerun the cluster_config utility,
and answer y to this question.
The remainder of this procedure does no t describe how to in stall an y other job
management system except LSF HPC .
12. When prompted, provide responses to install a nd configure LSF HPC.
The user n ame lsfadmin is the default user name for the primary LSF Administrator.
If you accept the default user n ame and a NIS account exists with the same name, LSF
HPC will be configured with the existing NIS account. You will not be prompted to supply
a password for the lsfadmin account.
Otherwise, accept all default answers.
Please provide the name of the Primary LSF Administrator.
Other administrators can be configured later, but this user
must exist now in order to be given ownership of the files
to be installed. Note that if this user does not exist, it
will be created locally [lsfadmin]:
Enter
Could not find the lsfadmin user, create? (y|n) [y] Enter
Changing password for user lsfadmin.
New password: your_lsfadmin_password
Retype new password: your_lsfadmin_password
passwd: all authentication tokens updated successfully.
What name shall LSF use to uniquely identify this cluster?
No existing hostnames are allowed, name must be less than
39 characters long with no whitespace:
Cluster Name [hptclsf]:
Enter
Executing the Platform LSF installation script (hpcinstall)...
Logging installation sequence in
/opt/hptc/lsf/files/tmp/hpc6.0_hpcinstall/Install.log
LSF pre-installation check ...
Checking the LSF TOP directory /opt/hptc/lsf/top ...
4-18 Con figuring and Imaging the System