HP XC System Software Hardware Preparation Guide Version 2.1

Figure 3-8: HP Integrity rx1620 Server
PCI-X 133
PCI-X 133
SCSI LVD/SE
LAN 10/100
LAN Gb A
GSP RESET S
SOFT HAR D
LAN Gb B
CONSOLE / REMOTE / UPS
SERI AL
USB
!"#
1 The port l abeled LAN 10/100 is the MP connection to the ProCurve Console Switch.
2 The port labeled LAN Gb A connects to the Administrative Switch (branch or root).
3 The port labeled LAN Gb B is us ed for an external connection.
Figure 3-9 s how s the back of the H P Integrity rx2600 server.
The high-speed interconnect card such as an InfiniBand or QsNet
II
card must be inserted into
the top PCI-X slot. The external connection is made on the Ethernet adapter card.
Figure 3-9: HP Integrity rx2600 Server
VGA CONSOLE / REMOTE / UPS
LAN 10/100
LAN Gb
SCSI LVD/SE
USB
CONSOLE
SERIAL A
SERIAL B
PWR
1
PW R
2
Management Card
LAN 10/100
GSP RESETS
SOFT HARD
TOC
PCI-X 133
PCI-X 133
PCI-X 133
PCI-X 133
!"#
1 The t op port labeled LAN 10/100 is the MP connection to the ProCurve Console Switch .
2 The port labeled LAN Gb connects to the Administrative Switch (branch or root).
3 The bottom port labeled LAN 10/100 is unused.
Figure 3-10 shows the back of the HP Integrity rx 2620 server.
Figure 3-10: HP Integrity rx2620 Server
VGA CONSOLE / REMOTE / UPS
LAN 10/100
LAN Gb A
SCSI LVD/SE
USB
CONSOLE
SERIAL A
SERIAL B
PWR
1
PW R
2
Management Card
LAN Gb B
GSP RESETS
SOFT HARD
TOC
PCI-X 133
PCI-X 133
PCI-X 133
PCI-X 133
!"#
1 The port l abeled LAN 10/100 is the MP connection to the ProCurve Console Switch.
2 The port labeled LAN Gb A connects to the Administrative Switch (branch or root).
3 The port labeled LAN Gb B is us ed for an external connection.
Preparing Indivi dual Nodes 3-13