6.3 HP IBRIX X9720/StoreAll 9730 Storage Administrator Guide (AW549-96073, June 2013)

a. Run the following commands from the active Fusion Manager (r150b15 in this example)
to view the existing servers and then unregister the passive Fusion Manager (r150b16
in this example):
To view the registered management consoles:
[root@r150b15 ibrix]#ibrix_fm -l
The command provides the following output:
NAME IP ADDRESS
------- ----------
r150b15 172.16.3.15
r150b16 172.16.3.16
To unregister a Fusion Manager that has been uninstalled:
[root@r150b15 ibrix]#ibrix_fm -u r150b16
In this instance, r150b16 is the management console that has been unregistered.
The following output is provided:
Command succeeded!
Notice that when you run the ibrix_fm -l command, r150b16 is no longer listed.
[root@r150b15 ibrix]#ibrix_fm -l
NAME IP ADDRESS
------- ----------
r150b15 172.16.3.15
b. Run the following command to install the passive Fusion Manager:
/usr/local/ibrix/sbin/setupfm --install -P /usr/local/ibrix -C
bond1 -w 9009 -M passive -v 172.16.3.65 -m 255.255.248.0 -d
bond1:0
(Optional) Run the following command to register Fusion Manager:
/usr/local/ibrix/sbin/setupfm --registerFM -P /usr/local/ibrix
-C bond1 -v 172.16.3.65 -w 9009
c. If registered, verify the registered Fusion Manager on the active Fusion Manager node
by entering the following command:
[root@r150b15 ibrix]#ibrix_fm -l
In command displays the following output:
NAME IP ADDRESS
------- ----------
r150b15 172.16.3.15
r150b16 172.16.3.16
d. Verify that the newly installed node is registered as the passive Fusion Manager by
entering the following command:
[root@r150s16 ~]#ibrix_fm -i
The command displays the following output:
FusionServer: r150s16 (passive) Active FM: 172.16.3.15
168 Recovering the X9720/9730 Storage