6.3 HP IBRIX X9720/StoreAll 9730 Storage Administrator Guide (AW549-96073, June 2013)

4. Install the software on the server blade. The Quick Restore DVD is used for this purpose. See
“Recovering the X9720/9730 Storage” (page 154) for more information.
5. Set up fail over. For more information, see the HP StoreAll Storage File System User Guide.
6. Enable high availability (automated failover) by running the following command on server 1:
# ibrix_server -m
7. Discover storage on the server blade:
ibrix_pv -a
8. If you made any other customizations to other servers, you may need to apply them to the
newly installed server.
142 Upgrading firmware