6.2 HP IBRIX 9300/9320 Storage Administrator Guide (AW549-96049, December 2012)

1. Identify the segment residing on the physical volume to be removed. Select Storage from the
Navigator on the GUI. Note the file system and segment number on the affected physical
volume.
2. Locate other segments on the file system that can accommodate the data being evacuated
from the affected segment. Select the file system on the GUI and then select Segments from
the lower Navigator. If segments with adequate space are not available, add segments to the
file system.
3. Evacuate the segment. Select the file system on the GUI, select Segments from the lower
Navigator, and then click Rebalance/Evacuate on the Segments panel. When the Segment
Rebalance and Evacuation Wizard opens, select Evacuate as the mode.
On the Evacuate Advanced dialog box, locate the segment to be evacuated and click Source.
Then locate the segments that will receive the data from the segment and click Destination. If
the file system is tiered, be sure to select destination segments on the same tier as the source
segment.
98 Maintaining the system