6.2 HP IBRIX 9300/9320 Storage Administrator Guide (AW549-96049, December 2012)

6. If you are upgrading to 6.2, you must complete the steps provided in the “After the upgrade”
section for your type of upgrade, as shown in the following table:
Complete the steps in this sectionType of upgrade
“After the upgrade” (page 113)Online upgrades
“After the upgrade” (page 115)Automated offline
upgrades
“After the upgrade” (page 118)Manual offline
upgrades
Finding additional information on FMT
You can find additional information on FMT as follows:
• Online help for FMT. To access the online help for FMT, enter the hpsp_fmt command on
the file system node console.
• HP HPSP_FMT User Guide. To access the HP HPSP_FMT User Guide, go to the HP StoreAll
Storage Manuals page:
http://www.hp.com/support/IBRIXManuals
Downloading MSA2000 G2/G3 firmware for 9320 systems
To obtain the firmware, complete the following steps:
1. Go to the following HP web site:
http://www.hp.com/go/support
2. Select Download drivers and software , enter your model number in the search box, and
begin your search.
3. Select your array type.
4. Select your operating system.
5. Find the firmware version listed in the table, and select the hyperlink in the far left column.
6. To download the installation instructions, select the Installation Instructions tab.
7. To download the firmware, click Download.
Downloading MSA2000 G2/G3 firmware for 9320 systems 129