zl Power Supply Shelf Installation and Getting Started Guide 2009-06

1-5
Introducing the HP ProCurve Switch zl Power Supply Shelf
EPS Port Operation
Introducing the HP ProCurve
Switch zl Power Supply Shelf
EPS Port Operation
The Power Supply Shelf supports two EPS ports that can provide power to
PoE/PoE+ capable zl switches through EPS cables. Each external power
supply unit can provide additional or redundant PoE/PoE+ power to a zl
switch. All internal power supplies have PoE/PoE+ power.
Each EPS port operates individually. The Power Supply Shelf has two EPS
ports that can provide maximum power, depending on which power supply is
installed, either 273 W or 900 W of PoE power at 50 VDC each, or 300 or 900
W of PoE+ power at 54 VDC. See “Recommended Connection Topologies” on
page 2-12.
Supported Switches
Switch Product Number
ProCurve Switch 5406zl J8697A
HP ProCurve Switch
5406zl-48G
J8699A
HP ProCurve Switch
5406zl-48G-PoE+
J9447A
ProCurve Switch 5412zl J8698A
HP ProCurve Switch
5412zl-96G
J8700A
HP ProCurve Switch
5412zl-96G-PoE+
J9448A
ProCurve Switch 8206zl J9475A
ProCurve Switch 8212zl J8715A