4.00.0a HP StoreEasy 3000 Storage Release Notes (B7D88-96167, April 2014)

Table 1 SPP supplement build components (continued)
VersionSPP supplement build componentsSupplement
62.8.0.64HP ProLiant Dynamic Smart Array RAID Controller
Driver for Microsoft Windows Server 2012 and
Microsoft Windows 2012 R2 x64 Editions
cp020819.exe
16.4.0.1HP Broadcom 1Gb Driver for Windows Server
2008 Editions
cp021801.exe
62.4.0.64HP ProLiant Smart Array HPCISSS3 Controller
Driver for Windows Server 2012 x64 Editions
cp020713.exe
1.60.17.0HP Smart Storage Administrator (HP SSA) for
Windows 64-bit
cp020938.exe
1.60.17.0HP Smart Storage Administrator (HP SSA) CLI for
Windows 64-bit
cp020950.exe
8.2.0.0Combined Chipset Identifier for Windows Server
2012 R2
cp021001.exe
Workarounds
General
• If you are logged in to the storage system as a domain user and open the Event Notifier
Configuration Wizard, the following error message is displayed:
Unable to restart the Event Notification service. Check the Event Log
for more detailed information about this error.
Log in to the system as a local administrator (not a domain user) and open the wizard.
• If the HP 38x0 Gateway Storage Blade is installed into an existing c7000 or c3000 enclosure,
the image of the server blade that is displayed in the Onboard Administrator GUI may incorrectly
reflect the older G7 version of the server blade.
The incorrect image or firmware in Onboard Administrator does not affect management or use
of the server blade. The issue is resolved in the latest firmware, version 3.71.
• If you attempt to change the desktop background, it is blocked due to a group policy on the
system.
To change the desktop background, you must change the group policy settings:
1. Log in to the system as a user in the local administrators group.
2. Open a PowerShell or Command window and enter the gpedit.msc command in the
command line.
3. In the Local Group Policy editor, select User Configuration→Administrative
Templates→Desktop, and click Desktop.
4. Double-click the Desktop Wallpaper setting.
5. Select Disabled and then apply the setting change.
6. Log off and log in for the changes to be effective.
Initial Configuration Tasks
• The Initial Configuration Task window displays the following message:
To complete configuration of the first node, log off and then log on
again using a domain user account with local administrative permissions.
6 Workarounds