HP StoreEasy 3000 Storage Release Notes 3.03.
© Copyright 2013 Hewlett-Packard Development Company, L.P. Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation.
Description These release notes describe the release of version 3.03.0a for HP StoreEasy 3000 Storage running Microsoft Windows Storage Server 2012 Standard Edition. IMPORTANT: Included with your storage system is the HP System Recovery DVD. This DVD is used to restore the system to factory defaults. Keep this DVD in a safe place.
Log in to the system as a local administrator (not a domain user) and open the wizard. • If the HP 3830 Gateway Storage Blade is installed into an existing c7000 or c3000 enclosure, the image of the server blade that is displayed in the Onboard Administrator GUI may incorrectly reflect the older G7 version of the server blade. The incorrect image or firmware in Onboard Administrator does not affect management or use of the server blade. The issue is resolved in the latest firmware, version 3.71.
The message box has two buttons; Retry and Cancel. This may occur if you have ordered the HP StoreEasy 3000 Storage systems with optional network adapters and have cabled ports on those adapters to your network infrastructure. As shown in the Quick Start Guide, there is one network cable that must run between the Port 4 adapters on each of the two nodes.
Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback (docsfeedback@hp.com). Include the document title and part number, version number, or the URL when submitting your feedback.
