3.01.0a HP StoreEasy 3000 Storage Release Notes (B7D88-96058, December 2012)

Workaround: As shown in the Quick Start Guide, there is one network cable that must run between
the Port 4 adapters on each of the two nodes. Keep this network cable in place, as well as the network
cable to the iLO port, but disconnect all other network cables on the system where you received the
error message. Then click Retry. You may reconnect the cables later after the second node is discovered.
System installation and recovery
This section describes issues related to the system installation and recovery process.
Issue: Command-line Tools and Internet Printing Client features are not installed by default with the
operating system.
Workaround: Use Server Manager to manually install these features:
1. In Server Manager, select Features and then click Add Features.
2. Select Command-line Tools (located under Windows Server Backup features) and Internet Printing
Client in the features list.
3. Click Next and complete the Add Features Wizard installation process.
Issue: The time zone selected during the image process is not retained. The image process allows you
to set the time zone; however, the time zone is always set to Pacific time when the operating system
comes up for the first time.
Workaround: Change the time zone after the system is fully imaged.
Installation instructions
Instructions for installing new systems are provided in either the HP StoreEasy 3830 Gateway Storage
Quick Start Guide or the HP StoreEasy 3830 Gateway Storage Quick Start Guide, depending on the
product you purchased.
Effective date
December 2012
Installation instructions 5