User Manual

Basic setup8
Install the Upgrade Kit software
IMPORTANT: Do not connect the PC adapter until directed.
NOTE: Select Always Allow to any dialogs that display from your firewall software.
1. Close all other software programs, especially HP software such as the HP Solution Center or HP Director.
2. Insert the HP Wireless Printing Upgrade Kit CD.
NOTE: If the New Hardware Found wizard displays, select “Install Automatically” and Continue.
3. Click Install to install the software.
4. Follow the onscreen instructions to install the software.
IMPORTANT: If the installer asks you to insert your printer or All-in-One CD, you can click Cancel. You may
have to click Cancel several times.
5. Insert the PC adapter into a USB port on the computer when instructed.
TIP: If you have trouble inserting the PC adapter into the USB port, you can purchase an extension cable or
swivel extender for the port from your local store.
6. Follow all the instructions until the installation is complete.
IMPORTANT: With some versions of Windows XP, you may receive a message that the USB controller needs to be
updated and will be directed to a Microsoft web page to download an update. You must download and install this
update for your WIreless Printing Upgrade Kit to work properly.