User Manual

Basic setup 2

2Basic setup

If you misplace your Setup Guide, you can use these instructions to initially set up your Wireless Printing Upgrade Kit.

IMPORTANT: Make sure that you can print from the printer using a USB cable before installing the Wireless Printing

Upgrade Kit.

Connect the printer adapter

1. Turn off the HP printer.

2. Use the USB cable to attach the printer adapter to the USB port on the BACK of your HP printer.

IMPORTANT: If your printer has a USB port on the front, do not attach the printer adapter to it. Use the

back USB port.

3. Plug in the power cord to the printer adapter and the power outlet and verify that the first two lights (green and

blue) come on.

4. Turn the printer on.