HP WebQos Peak for Solaris® Concepts and Operation Guide

36 AppendixA
HP WebQoS Configurable Parameters
HP WebQoS Configurable Parameters
HP WebQoS Configurable Parameters
You can modify the behavior of the HP WebQoS modules by setting the
appropriate parameters in your Netscape configuration file:
/ server_root /config/hpac/config.ac.
Table A-1 HP WebQoS Configurable Parameters for Netscape
Parameter Range/Type Default Description
admit.always N/A N/A Configures HP WebQoS to always
accept sessions.
admit.load N/A N/A Sets the “Admit Sessions” to use
the load threshold.
admit.load.threshold 0.0 <= x 2.0 Sets the load threshold for
admitting a session.
admit.shutdown N/A N/A Sets the “Admit Sessions” to
shutdown.
admit.shutdown.delay 0 <= n
(integer)
600 Sets how much time before HP
WebQoS shuts down and rejects all
(new and remaining) sessions.
cookie.password string N/A Sets the password used in creating
the MD5 digest.
deferral.enterMsg string You will
automatically enter
the site in
.
Part of the allocation page message
served when a session is rejected.