HP WebQos Peak for Solaris® Concepts and Operation Guide

28 Chapter3
Configuring HP WebQoS Peak
Configuring HP WebQoS
logged to a file. To log the statistics to a file add the following lines to
/ server_root /config/hpac/config.ac:
log.file filename
log.interval seconds
Where filename is the name of the file to which to save the statistics
and seconds is how often the statistics are saved (in seconds). The
log.interval default is 60 seconds.
Restart the web server for the changes to take effect.
The following is an example of a log entry:
10/Mar/1998:20:39:00,15,0,0,0,0,0,0,0,181,0,0,0.5,0.00,92
where each field is delimited by a comma. The fields are:
Table 3-7 HP WebQoS Log File Statistics
Statistic Name Example Value
Time (GMT) 10/Mar/1998:20:39:00
Basic Sessions 15
Priority Sessions 0
Redirected Sessions 0
Sessions Rejected 0
Sessions Rejected Again 0
Sessions Timed Out 0
Sessions Too Long 0
Bad MD5 Requests 0
Basic Requests 181
Priority Requests 0
Management Requests 0
Load 0.5
Percentage Priority Requests 0.00
Last Allocation Delay 92