HP WebQos Peak for Solaris® Concepts and Operation Guide

26 Chapter3
Configuring HP WebQoS Peak
Configuring HP WebQoS
Expiration
Determine when to end a session.
For the default, the interval between requests is set to 600 seconds (10
minutes) and the session duration is disabled.
Disable GUI
Disable access to the HP WebQoS Peak Session Settings page.
Table 3-4 HP WebQoS Peak Configurable Parameters: Expiration
Parameter Description
Interval
between
Requests
The maximum amount of time, in seconds, allowed between
requests within a session.
If the time between requests exceeds the specified threshold,
the session is ended.
Session
Duration
The maximum amount of time, in seconds, of a session.
If the session exceeds the specified threshold, the session is
ended.
Set this parameter to zero to disable this threshold.
Table 3-5 HP WebQoS Peak Configurable Parameters: Disable GUI
Parameter Description
Disable this
Configuration
Page
Check this box if you want to disable the HP WebQoS Peak
Session Settings page. You can still access the other
adminstration pages.
To re-enable this page, do the following:
1. Edit the / server_root /config/hpac/config.ac
file and remove the configuration parameter
gui.disable.
2. Restart the web server.