HP WebQos Peak for Solaris® Concepts and Operation Guide

Chapter 3 17
Configuring HP WebQoS Peak
Configuring HP WebQoS
Setting the HP WebQoS Configurable Parameters
You can edit the configuration parameters in two different ways:
• You can access the HP WebQoS Peak Session Settings
administration web page from the URL http:// system_name /hpac/.
Your Netscape Enterprise Server must be runningto accessthis page.
Use the same user and password that you configured for your
Netscape Administration Server to access this page.
• You can edit the configuration file
/ server_root /config/hpac/config.ac
Refer to “HP WebQoS Configurable Parameters” on page 36 for a list
of the available configurable parameters for the Netscape Enterprise
Server.
You must restart the web server for the changes to take effect.
NOTE If you manually edit the configuration file and do not restart the web
server, the changes are overwritten or deleted if you update the
configuration using the WebQoS Peak Session Settings
administration web page.
The following is an example of the HP WebQoS Peak Session Settings
page: