HP WebQoS Peak for HP-UX Concepts and Operation Guide

Appendix A 79

HP WebQoS Conﬁgurable Parameters

HP WebQoS Conﬁgurable Parameters for Zeus

You can modify the behavior of the HP WebQoS modules by setting the

appropriate parameters in your Zeus conﬁguration ﬁle:

$ZEUSHOME

/ns-config/https-

server_name

/config/hpac/config.ac.

Table A-2 HP WebQoS Conﬁgurable Parameters for Zeus

Parameter Range/Type Default Description

admit.always N/A N/A Conﬁgures HP WebQoS to always

accept sessions.

admit.load N/A N/A Sets the “Admit Sessions” to use

the load threshold.

admit.load.threshold 0.0 <= x 2.0 Sets the load threshold for

admitting a session.

admit.priority.damping 0.0 <= x <=

1.0

0.001 The damping factor used to

compute the priority percentage.

Larger values make the controller

more responsive to recent activity.

admit.priority.threshold 0.0 <= x <=

1.0

0.9 The value of the priority fraction

when priority requests are rejected

(0.9 = 90% priority percentage).

admit.shutdown N/A N/A Sets the “Admit Sessions” to

shutdown.

admit.shutdown.delay 0 <= n

(integer)

600 Sets how much time before HP

WebQoS shuts down and rejects all

(new and remaining) sessions.

cluster.disable N/A N/A Disables clustering. The system

will not try to open the

hpac-cluster port.

cluster.domain string The domain used to limit the scope

of the cluster over which the

client-side cookies can be shared.

cluster.group string default Sets the cluster group.