HP WebQoS Peak for HP-UX Concepts and Operation Guide

36 Chapter4

HP WebQoS Peak for the Zeus Web Server

Conﬁguring HP WebQoS for Zeus

type the following: /usr/local/zeus/web/bin/htpasswd \

/webpages/server1/hpac/adminfile hpacadmin qosserver1

If the user does not exist in adminfile, it is added to the ﬁle. Otherwise,

the existing password for the user is overwritten.

If you want to modify the user, you can edit adminfile. However, you

must use htpasswd to modify the password.

You must have write permission for adminfile in order to change the

password using the htpasswd command.

Setting the HP WebQoS Conﬁgurable Parameters for

Zeus

You can edit the conﬁguration parameters in two different ways:

• You can access the HP WebQoS Settings administration web page at

the URLhttp://

system_name

port_number

/hpac. Your Zeusserver

must be running to access this page. Use the username and password

you conﬁgured (either from the setup script or by using the htpasswd

command) to access this page. Select Control to get to the Settings

administration web page.

• You can edit the conﬁguration ﬁle

$ZEUSHOME

/ns-config/https-

server_name

/config/hpac/config.ac

Refer to “HP WebQoS Conﬁgurable Parameters for Zeus” on page 79

for a list of the available conﬁgurable parameters for the Zeus server.