Configuring HP WebQoS for HP-UX

Conﬁguring HP WebQoS

Conﬁguring WebQoS from the Management User Interface

Chapter 376

To assign requests to queues, do the following:

1. Select Web Server Request Queues... from the Edit Site

Configuration Advanced dialog box.

Figure 3-26 Site Advanced Web Server Queue Management Dialog Box

2. In the Site Advanced Web Server Queue Management dialog box

(Figure 3-26, "Site Advanced Web Server Queue Management Dialog

Box"), you can modify the Scheduling Policy by selecting the

appropriate policy from the pull down menu.

The scheduling policies supported by WebQoS are:

• Weighted Fairshare - Process entries from the queue based on the

weight assigned to the queue. The higher the weight, the higher

the priority of the entry. Default weights are: high priority = 6,

medium priority = 3, low priority = 1.

For example, if a weight of 6 is assigned to the high priority queue,

3 to the medium, and 1 to the low, then six entries are processed in

the high priority queue for every three entries processed in the

medium priority queue and every one entry processed in the low

priority queue.

• Strict Priority Order - Process all requests in the high priority

queue ﬁrst, process all requests in the medium priority queue

next, and ﬁnally process all requests in the low priority queue.

• Fairshare - Process one request from each queue: one from the

high priority queue, one from the medium priority queue, and one

from the low priority queue. Then begin again. No priorities are