Configuring HP WebQoS for HP-UX

Configuring HP WebQoS
Configuring WebQoS from the Management User Interface
Chapter 3 67
Figure 3-19 Add Service Level Objectives Dialog Box
a. Select the SLO Type from the pull down menu in the Add Service
Level Objectives dialog box (Figure 3-19, "Add Service Level
Objectives Dialog Box"). For specific information on the SLOs
supported by WebQoS and descriptions of Instance and Class
parameters, see “Service Level Objectives for Site” on page 158.
b. Enter an appropriate number (based on the SLO type) in the
Number input box.
c. Select the Class from the pull down menu if appropriate.
d. Enter the appropriate SLO Priority. The SLO priority defines
the relative priority across SLOs and thresholds to be maintained
for the site. WebQoS performs the corrective actions that are
defined for the highest priority SLO or threshold violated before
taking other corrective actions. When multiple SLOs and
thresholds are violated, the corrective action with the highest
priority is taken. The SLOs are prioritized in ascending order
(from lowest to highest) meaning a priority 1 SLO is higher in