Configuring HP WebQoS for HP-UX

Conﬁguring HP WebQoS

Conﬁguring Your Web Server

Chapter 3 37

2. Stop the Zeus web server from the Zeus administration server.

3. Delete the virtual server.

4. Start the Zeus web server.

5. Make sure all virtual servers are enabled.

6. Remove the site in WebQoS.

Subservers

Zeus allows you to conﬁgure subservers (software virtual servers or host

header-based virtual servers). These subservers cannot be conﬁgured

individually in WebQoS. Instead, all subservers conﬁgured to one IP

address and port number are conﬁgured as one site in WebQoS.

Adding/Deleting an Additional Subserver Subservers can be added

and deleted dynamically (refer to your Zeus web server documentation

for more information). You do not have to stop the web server.

Improving Web Server Performance

For information about improving the performance of your Zeus web

server, refer to question 7.1 (How can I tune the webserver for maximum

performance) of the Zeus FAQ located at

http://support.zeus.com/faq/.

iPlanet Web Server

Please refer to the following web page for iPlanet Web Server 4.1

performance conﬁguration information:

http://docs.iplanet.com/docs/manuals/enterprise/41/ag/esperfrm.htm#1011987

Please refer to the following web site for the iPlanet Web Server 4.0

tuning guide:

http://home.netscape.com/eng/server/webserver/4.0/perf.html

Please refer to the following web site for iPlanet Web Server 4.1

documentation:

http://docs.iplanet.com/docs/manuals/enterprise.html#41