Configuring HP WebQoS for HP-UX
Installing and Using HP LocalDirector Controller
Configuring HP LocalDirector Controller
Chapter 6146
Figure 6-4 HP LDControl Service Configuration Screen
Set the following parameters to configure the HP LDControl daemon:
Table 6-2 HP LDControl Daemon Configurable Parameters
Parameter Description
LocalDirector
Hostname
The hostname of the system on which Cisco
LocalDirector is running.
Dynamic Weight Starts/Stops the HP LDControl daemon.
When activated, the daemon will monitor the
system and adjust the weights, if necessary.
When deactivated, the HP LDControl
daemon sends the initial weights to Cisco
LocalDirector and exits.