HP Web Jetadmin - Supported Printer Features in HP Web Jetadmin

6
This allows for “cloning” a device’s settings to be applied to multiple devices if desired. Right-clicking
on a checkbox provides an option to “Check All” so that a device’s complete settings could be saved
to a template and later applied to multiple devices. There will be a select few that will not
automatically be checked in this case such as IP Address as that is a unique setting per device.
If multiple devices are selected in the device list, configuration items in the tab are shown with
unspecified or blank settings.
Another technique for configuring multiple devices or creating configuration templates involves using
the configuration template wizard from the Navigation tree. Right-click on Configuration in the
Navigation Tree and choose either Configure Multiple Devices or Create Configuration
Template to start the configuration wizard.
Two lists appear: Devices and Network Cards. They are separated because some network cards
are modular and it cannot be assumed which one is in the printer. The list of configurable options
varies by the devices selected. There is not nearly as much disparity with network cards, most will
display the same items under the Network category. With multiple devices selected, a superset of
items will appear in each of the configuration categories. All configurable items will probably not
apply to all devices, only settings that apply to a device will be set on that device. Some options may
be repeated multiple times because different settings are supported on different devices. If it is not