HP Web Jetadmin - Supported Printer Features in HP Web Jetadmin

18
Estimated Supplies
Levels
By default, HP Web Jetadmin displays the estimated supplies levels in 10% increments. For some devices, you can choose to display the estimated
supplies levels in 1% increments instead of 10% increments. However, displaying the estimated supplies levels in 1% increments does not imply a 1%
level of accuracy. The accuracy of the actual supplies levels and pages remaining varies depending on the types of documents printed and other
factors.
Image Fuser Kit Low
Threshold
Use one or more of these options to specify the supply level threshold to reach before displaying a message indicating that the supply is low.
Image Fuser Kit Very Low
Action
Use one or more of these options to specify the action for the device to take when a supply reaches a very low condition. To set each option, select: ●
Stop to stop the current print job. ● Prompt to Continue to allow the user to decide whether or not to finish printing. ● Continue to complete the current
print job.
Image Transfer Kit Very
Low Action
Use one or more of these options to specify the action for the device to take when a supply reaches a very low condition. To set each option, select: ●
Stop to stop the current print job. ● Prompt to Continue to allow the user to decide whether or not to finish printing. ● Continue to complete the current
print job.
Image Transfer Kit Low
Threshold
Use one or more of these options to specify the supply level threshold to reach before displaying a message indicating that the supply is low.
Magenta Cartridge Low
Threshold
Use one or more of these options to specify the supply level threshold to reach before displaying a message indicating that the supply is low.
Maintenance Kit Low
Threshold
Use one or more of these options to specify the supply level threshold to reach before displaying a message indicating that the supply is low.
Maintenance Kit Very Low
Action
Use one or more of these options to specify the action for the device to take when a supply reaches a very low condition. To set each option, select: ●
Stop to stop the current print job. ● Prompt to Continue to allow the user to decide whether or not to finish printing. ● Continue to complete the current
print job.
Supply Levels Gauge
Use this option to control whether or not the supply levels gauge is displayed on the control panel for single-function devices.
Use this option to set a threshold for the number of pages that the device prints after a supply reaches a very low status before displaying a notification
message. You can configure the threshold based on your usage history for each supply to ensure that the very low message appears in time to order
or locate a replacement supply.
Supply Low Alerts
Use this option to enable or disable the supply low alerts. If this option is enabled, the device triggers an alert when the supply is very low.
Toner Collection Unit
Very Full Action
Use one or more of these options to specify the action for the device to take when a supply reaches a very low or full condition.
Yellow Cartridge Low
Threshold
Use one or more of these options to specify the supply level threshold to reach before displaying a message indicating that the supply is low.
Copier
Color Copy Mode
Use this option to set the device to the desired copy mode.
Color Copy Mode With
Auto
Use this option to set the device to the desired copy mode.
Color Copy Option
The Color Copy Option lets you disable color copying and control the cost of color printing.
Copier Fit To Page
This option enables the device with local copier capability to fit the input image size automatically onto the output sheet size. This object allows you to
scale to the output size without knowing the scaling percentage.
Copier Reduce/Enlarge
This option lets you to specify reduction or enlargement for copies as a percentage of the original. A value of 100 makes copies with no reduction or
enlargement; higher values make enlargements, while lower values cause a reduction. Reductions or enlargements are useful when the paper size of
the copy is different from the size of the source document. Some useful values for copying from one size to another would be: Legal to letter (78%
Letter to A4 (97%) A4 to letter (103% Legal to A4 (83%)
Copy - Alternative
Letterhead Mode
When printing using duplex mode, this option defines the first side of the page as having letterhead and the other side having no letterhead.