HP Web Jetadmin - Performance and Threadpools in HP Web Jetadmin

DevicePollingReceiver.ForceSendEvent Alerts Poller Results HandlerThreads
5
Increasing this value might help performance during
alert subscription and might also help when receiving
traps from devices.
DevicePollingReceiver.Normal Alerts Poller Results HandlerThreads
5
Increasing this value might help performance for
background alerts polling.
DevicePollingReceiver.NumManualPollerThreads
5
Increasing this value might help if many alerts are
polling-only alerts and might help the subscribe time
for alerts.
DiscoveryManager.NumHostIpResolverThreads
30
Increasing this value might help reduce discovery
times.
DiscoveryManager.NumResolverThreads
10
Increasing this value might help reduce discovery
times.
DiscoveryManager.SLPListenerThreadPool
5
Increasing this value might help with SLP listen
discoveries.
DiscoveryMethodSpecifiedAddress.PingThreadCount
30
Increasing this value might help if specified address or
subnet range is being used for discovery.
FilterComponent.Threads
2
This is the threadpool used to evaluate auto-group
membership. Increasing this value might help if there
are a large number of auto-groups defined.
GroupsComponent.EventHandlerThreads
5
Event handler for groups component. These refer to
internal HP Web Jetadmin server events. Some
examples are: GroupMembershipChangedEvent
(someone removed a device from the group),
GroupAttributeChangedEvent,
EventMoabDataCacheChange (device data changed),
EventMoabDeviceActivated (new device in the
system).
MoabDevice.DependentMoeRefreshQueueThreads
4
Whenever a MOE that other MOEs have a
dependency on is changed, the threadpool is used to
update the MOEs that have the dependency in the
background after sending the event saying the original
MOE has changed. This is used to ripple changes
through the system for MOEs that depend on each
other. As an example, the SupplyBlackCartridge MOE
has dependencies on the SupplyBlackTonerCartridge
and SupplyBlackInkCartridge MOEs.
MoabDevice.LockBucketSize
23
This value determines how many DeviceIDs can be
locked at one time when reading/writing data to the
database for a particular device.
MoabDevice.MaxConcurrentThreadsInResolution
10
Increasing this value might help the MOAB portion of
discovery resolution (shortening overall discovery
times).
MoabDevice.MaxThreadPercentageUsedDuringDiscovery
50
The percentage of the overall MoabThreadPoolSize
that can be used for discovery.