HP Web Jetadmin - Creating Reports and Exporting Data

Under Formatting (Detailed), the following options are available:

 Usage Period: Allows the user to select a time period in which to analyze supply usage. Values

available are: day(s), week(s), month(s), and year(s).

 Installation State: Determines what state the supply must be in to be included in the report.

“Active” indicates the supply is still in the device and being actively used. “Removed” indicates

the supply has been removed from the device and is no longer in use. Values can be Active and

Removed, Active Only, or Removed Only.

Device Information is defined in the “Accessory Inventory report” section on page 18.

Under Report Data, the user can select specific data relating to supply usage to appear as columns in

the report (Figure 38). These values include:

 (%) Supply Consumption: The amount of the supply used since data was first collected on it. It is

calculated as Initial Supply Level minus Estimated Supply Level.

 Average Supply Coverage %: The average supply coverage per page. It is calculated as:

average supply coverage = (supply max capacity * supply consumption * 0.05) / pages printed

 Estimated Capacity in Pages: The approximate number of pages that can be printed with the

supply, based on an average supply coverage rate of 5% per page.

 Estimated Pages Printed: The total pages printed with the supply. It is calculated based on values

captured by HP Web Jetadmin’s data collection process on the device.

 Estimated Pages Remaining: The number of pages the supply can expect to print using a standard

5% coverage rate per page (returned by the supply to HP Web Jetadmin).

 Estimated Supply Level (%): An estimated percent remaining of the supply (returned by the supply

to HP Web Jetadmin).

 Initial Supply Level (%): The percentage level of the supply when HP Web Jetadmin performed the

initial data collection on the device.

 Install Status: Indicates whether the supply is still being used (active) or has been removed. Values

can be “Active” or “Removed”.

Figure 38—Supply Usage report