HP Web Jetadmin - Creating Reports and Exporting Data

26
 Primary sort options include device information (such as Asset Number, Device Model, IP
Address, and Serial Number) and report data (such as those listed above under Time Interval),
among others.
 Secondary Sort options are the same as those for Primary Sort.
Show totals is used to show column subtotals per device and overall totals for the selected devices in
the report.
Exclude devices with no collected data is defined in the “Accessory Inventory report” section on
page 18.
Date range is defined in the “Accessory Inventory report” section on page 18.
Device Information is defined in the “Accessory Inventory report” section on page 18.
Under Report Data, the user can select specific data relating Device Utilization by User to appear as
columns in the report (Figure 28). Page counts are specific to the displayed User and to the Date
range selected. Some of the more frequently used job types and media sizes are listed below.
Job Type:
 Adobe PDF Pages: The total PDF pages that were printed.
 Color Pages: The total number of color pages printed.
 Copy Pages: The number of pages output using the copy function; the Copy Pages value is equal
to the number of pages that are scanned times the number of copies printed for each scanned
page. The actual scanned pages from copying are included in the Scan Pages count.
 Digital Send Pages: The number of pages that have been digitally scanned and sent to another
location (either email or folder). Digital Send Pages do not include any printed page counts.
Figure 28—Device Utilization by User report