HP Web Jetadmin 10.3 - User Guide

NOTE: For easier password management, it is recommended to set the same file system password for all
devices.
NOTE: The file system password needs to be set for a device before the new file erase mode can be
configured. The file system password should be set via a separate device configuration. Once set, the new file
erase mode value can be set.
To set the initial file system password for a device, type the password in File system password. Type the
password again in Confirm password.
Secure File Erase Mode
This option determines the behavior of a secure storage erase operation and the erase operation that a
printer automatically performs to make space available on a hard disk drive for incoming print jobs. The
erase operations are designed to add available space to a device’s hard disk drive and to prevent
unauthorized users from accessing confidential information from a device’s hard disk drive or other erasable
storage device. The following are the supported secure file erase modes:
●
Non-secure Fast Erase: Erases the file system references to operations, such as completed print jobs.
By erasing the references, space on the hard disk drive is made available. This is the fastest erase mode
and the default mode.
●
Secure Fast Erase: Erases the file system references to operations and provides one layer of masking to
hide data stored on the hard disk drive or other erasable storage devices. This mode is slower than the
Non-secure Fast Erase but more secure.
●
Secure Sanitizing Erase: Erases the file system references to operations and provides multiple layers
of masking to hide data stored on the hard disk drive or other erasable storage devices. This mode may
introduce a significant performance impact to the device while the process is executing.
NOTE: The file system password needs to be set for a device before the new file erase mode can be
configured. The file system password should be set via a separate device configuration. Once set, the new file
erase mode value can be set.
To configure this option, select a file erase mode from the drop-down list.
Device Configuration Options for Digital Sending
●
Activity Log
●
Address Book Management
●
Administrator Information
●
Advanced Search Options
●
Clear All Network Folders
●
Default Messages Settings
●
Default Notification Settings for Email
●
Default Scan Settings for Email
●
Device Contacts Import
●
Digital Sending - Accessing the LDAP Server
●
Digital Sending - Auto Reset Settings
●
Digital Sending - Default ‘From:’ Address
402 Chapter 6 Device Configuration Options ENWW